As part of a bathroom or floor renovation, we lay the water underfloor heating pipework, connect it to a manifold or your existing heating system, and pressure-test it before the new floor covering goes down
Santehniķis Rīgā plans and installs water underfloor heating systems as part of bathroom or floor renovations in Riga. Installation for a small bathroom starts from €300, with a 12-month warranty on all work — we start with a free site visit to prepare an exact quote for your renovation timeline.
If you're already planning a bathroom or floor renovation — changing the tiles, pulling up the old floor covering, or connecting new fixtures — that's the best moment to build in a water underfloor heating system. Laying the pipework happens before the new floor covering goes down, and connecting it to your existing heating system or manifold is technically similar to other plumbing work we do every day.
We work with water (hydronic) underfloor heating — not electric heating mats, which fall under an electrician's scope. On every project we carefully prepare the subfloor, lay the pipe loops, connect the system, and always pressure-test it before the floor covering goes down, to make sure everything works safely. All work comes with a 12-month warranty.
From subfloor preparation to a finished system ready for tiling
We clean and level the subfloor, adding insulation if needed
We lay the pipe loops in a pattern suited to the room
We connect the system to your existing heating system or heat source
We test the system before the floor covering goes down — no leaks
The underfloor heating pipework stays under the floor covering — if a leak or a bad connection turns up after tiling, fixing it means breaking up the floor. That's why we always pressure-test before covering, and make sure the connection to the manifold or heating system is solid and correctly adjusted. Careful planning and testing before the floor goes down is the only way to avoid costly repairs down the line. All work comes with a 12-month warranty.
Book Underfloor Heating InstallationPipe laying, connection and pressure testing
Depends on area, pipe length and connection complexity
If the pipework is already laid but needs connecting
Testing an existing system before or after renovation
* Exact price for larger projects confirmed after an on-site inspection — no hidden fees. 12-month warranty on all work.
"During our bathroom renovation we decided to lay underfloor heating pipe beneath the tiles. The technician laid the pipes carefully, connected them to the existing manifold and pressure-tested the system before tiling — no leaks anywhere."
"We were changing the bathroom flooring and decided to add a water underfloor heating system at the same time. Everything was explained clearly — how many loops, how they'd be laid out in the room, and how the connection would work. It works great."
"Needed to connect an underfloor heating loop in our house bathroom to the existing heating system. The plumber pressure-tested it before the floor covering went down, so we knew for sure everything worked properly. Gave us an honest heads-up about where it wasn't worth it, since the room was small."
After submitting, we'll call you within 5 minutes!
📞 We'll call you within 5 minutes!